Sage 50
NetSuite
Migrations · Updated November 5, 2026

How to migrate from Sage 50 to NetSuite

To migrate a client from Sage 50 to NetSuite with superglue's AI agent, connect the client's Sage 50 company or upload its exports, and give superglue access to the client's NetSuite account. superglue assesses the data in minutes, plans every phase, recommends an answer to each decision, and runs trial loads that reconcile to the cent before cutover. You review, decide and sign off with the client.

This guide covers Sage 50 US, formerly Peachtree.

What are the steps to migrate from Sage 50 to NetSuite?

Migrating from Sage 50 to NetSuite takes six steps: connect both systems, assess the data, plan every phase, decide the mapping, run trial loads and cut over. Each load repeats exactly what you tested, and every write waits for your approval.

  1. 01

    Connect Sage 50 and NetSuite

    Connect the client's Sage 50 company read-only through the Sage 50 ODBC driver, or upload the standard exports. superglue writes nothing. The client then gives superglue access to NetSuite.

  2. 02

    Assess the Sage 50 data

    In minutes, superglue counts every record, finds the open items and lists the data issues with examples. You know the size of the migration before you quote it.

  3. 03

    Plan every phase

    superglue drafts the plan from discovery to cutover, with tasks, owners and the Sage 50 specifics already in it.

  4. 04

    Decide the mapping

    superglue brings each decision below with a recommendation from the client's own data. You confirm or change each answer, and the client signs the mapping.

  5. 05

    Run the trial loads

    superglue loads a NetSuite sandbox account and compares it with Sage 50: the trial balance per period, the open receivables and payables per customer and vendor, the uncleared bank items, and the inventory value. superglue explains every difference, and you repeat the trial load until a full run reconciles with no new differences. The last run is a timed rehearsal of the cutover.

  6. 06

    Cut over

    At cutover, the client stops entry in Sage 50, and superglue loads the open items with the same steps as the trial loads. After the client closes the last period in Sage 50, superglue loads the final balances, and you sign the reconciliation with the client.

How do you get the data out of Sage 50?

  • The client sets a data access password in Sage 50, and the superglue gateway reads the company on a computer with Sage 50 installed. The standard exports work too.
  • Ask whether old years were purged. Purged transactions are gone, so those years move as balances.
  • Sage 50 keeps each company in its own folder, so ask for every company in scope.

The client installs the superglue gateway once: Connecting to on-prem systems

What needs to be configured in NetSuite?

The client turns on the SuiteCloud features and adds an integration record for superglue. superglue configures NetSuite and loads the data through that access, in a NetSuite sandbox account first, in this order:

  1. 01

    Subsidiaries and their base currencies.

  2. 02

    Accounting preferences and periods.

  3. 03

    The chart of accounts, then departments, classes and locations.

  4. 04

    Custom fields, records, segments, forms and workflows, and SuiteScript where the design needs it.

  5. 05

    Customers, vendors, contacts and items, then the opening balances and the open items.

Access setup for the client: NetSuite configuration guide

What moves from Sage 50 to NetSuite?

In Sage 50In NetSuite
Chart of accountsAccounts
Departments in the account IDsDepartments, classes and locations
CustomersCustomers
Jobs, with phases and cost codes in Premium and higherProjects
VendorsVendors
Inventory itemsItems
Cash accountsBank accounts

Open items

Open invoices and credit memos, open purchases and vendor credits, open sales and purchase orders, and inventory on hand with its cost.

Open items load as invoices, credit memos, vendor bills and vendor credits with their original numbers and dates, so the aging in NetSuite matches on day one.

History

Sage 50 keeps every transaction that was not purged. superglue reads all of them and reports how far back the detail goes.

History loads as journal entries per month, account and segment.

Which decisions do you make when you migrate from Sage 50 to NetSuite?

  1. 01

    Where do the departments in Sage 50 account IDs go?

    NetSuite keeps one account and puts the department on the transaction. With per-line departments turned on, each line can carry its own department.

    superglue splits each account ID into the account and the department, and proposes a NetSuite department for each code.

  2. 02

    Where do Sage 50 jobs go?

    NetSuite projects have project tasks, and phases fit those tasks.

    superglue maps active jobs to projects and phases to project tasks, and moves closed jobs as history only.

  3. 03

    How many subsidiaries does the client need?

    In NetSuite OneWorld, subsidiaries set the currency, the tax and which customers and vendors each company can use. Changing them after go-live means reworking master data.

    superglue recommends one subsidiary for each legal company in Sage 50, decided before any master data loads.

  4. 04

    Which item types do the items become?

    NetSuite separates inventory, non-inventory, service, other charge, kit and assembly items. Non-inventory, service and other charge items can be for sale, for purchase or for resale.

    superglue proposes the type for each item from how the client bought and sold it.

  5. 05

    Which cutover date does the client use?

    A cutover on the first day of a period lets the open items and balances load as of one date. A fiscal year start keeps the year's reports and year-end filings in one system, and a date in the middle of the year means combining two systems for the audit and the tax returns. Avoid a date when the team must close the books or report results.

    superglue recommends the first day of a month, and the first day of the fiscal year when the client can wait for it. The final balances load after the last period in Sage 50 is closed.

  6. 06

    How much history moves?

    Most clients need the open items plus one to three years of monthly balances in NetSuite, at least the current and the prior fiscal year for comparison, and older years as yearly balances. The client keeps the older detail in an archive.

    superglue recommends two years of monthly balances per account, and full transaction detail only where the client needs to look into single transactions.

What are the common challenges when you migrate from Sage 50 to NetSuite?

Purged transactions leave gaps in the history

Sage 50 lets users purge old transactions, and the detail of those years is gone. superglue reports the first year with full detail, and moves the earlier years as balances.

Expect the chart of accounts to shrink

Many Sage 50 companies repeat each account per department, such as 6100-01 and 6100-02, so the chart often shrinks a lot once departments become dimensions. Show the client the new chart early, because their reports change with it.

Reported years still change

Sage 50 keeps two fiscal years open, and clients post into the earlier year after its figures were reported. superglue compares each reported year with the approved trial balance before the history moves.

Multi-company clients need an intercompany plan

Clients with several companies keep one company folder for each, with intercompany balances between them. Agree early which companies merge, which become entities, and how the intercompany balances settle. superglue reads every company and matches the intercompany balances.

Lock the subsidiary structure before the first load

NetSuite fixes the base currency of a subsidiary when the subsidiary record is first saved, so a late change means a new subsidiary and a reload. Get the structure signed in the design phase.

Plan the sandbox around refreshes

A sandbox refresh replaces everything in the sandbox, including your configuration. superglue keeps the configuration and applies it again, so a refresh does not cost you the setup work.

Open items must not count twice

Open invoices and bills post to the receivables and payables accounts when they load, and the opening trial balance holds the same amounts. Load the open items and the opening balances against one conversion account, and check that it ends at zero.

Plan fixed assets as their own stream

The trial balance brings the cost and the accumulated depreciation, but the asset register needs each asset with its in-service date, useful life and depreciation to date, and tax books need their own values. Agree early where the register lives after go-live, and reconcile it to the asset accounts.

superglue also runs the rest of the NetSuite project. See the NetSuite implementation

Frequently asked questions

Which data moves from Sage 50 to NetSuite?

The chart of accounts, customers, vendors and items, the open items, and as much history as the client needs. The mapping table on this page shows where each record lands in NetSuite.

Does superglue write to NetSuite without my approval?

No. superglue only reads Sage 50. Before any write to NetSuite, it shows the target, the connection and a transformed sample, and waits for your approval.

How do I know the migration is complete?

superglue reconciles the trial load and the final load against Sage 50: the trial balance per period, the open receivables and payables per customer and vendor, the uncleared bank items, and the inventory value. You get a reconciliation report to sign with the client.

What happens when I start this migration?

You sign up and connect the client's systems. If you want to see a full migration run first, superglue can set up Northwind Outdoor Supply, a sample client.

Start your Sage 50 to NetSuite migration

Sign up and connect the client's systems, or let superglue set up Northwind Outdoor Supply, a sample client, to see a full migration run first.

Migrations to NetSuite